Flash Stock Firmware 10F LG G6 H870 KDZ Method Using LGUP & Uppercut.

Flash Stock ROM 10F LG G6 H870. The next lead volition explicate how to solve kicking loop or bricked effect on Android LG G6. Or you lot tin also operate this lead to upgrade to the electrical current Android version. This is 10F stock firmware, which 10f is the 2nd official LG Android 7.0 Nougat update for opened upwards UE devices. To flash the 10f stock firmware, nosotros ask the LGUP in addition to Uppercut.

We know that LGUP tool is a novel flashing tool to flash kdz/tot/bin stock ROM format into the LG smartphone device. LGUP piece of occupation solely on Windows Operating System. But, non all LG devices are supported past times LGUP flash tool. Therefore, nosotros ask Uppercut. the Uppercut allows LGUP to straight off piece of occupation alongside a ton of dissimilar LG telephone models. So you lot create non ask to live on confused to unwrap specific model files.

To flash a stock ROM LG G6 using LGUP tool, only install LGUP tool. Then double-click the uppercut.exe in addition to LGUP volition opened upwards in addition to unwrap your device automatically. For to a greater extent than special information you lot tin catch the forum-xda-developer here

So, what create nosotros ask to flash stock ROM 10f to LG G6? The next are the requirements.

Requirement.

1. A estimator alongside Windows OS based.
2. LG's Windows USB drivers. Here
3. LGUP tool Here
4. Download Uppercut from Here
5. Download Stock ROM 10f for LG G6.
• H87010f_00_OPEN_EU_OP_0417.kdz Here 

Instruction How to flash LG G6.

1. Make certain all required files higher upwards are successfully downloaded on your computer. Then, create the next step.
• Install LG USB Driver
• Install the latest LG UP software
• Extract or Unzip Uppercut.zip
2. Then, double-click the uppercut.exe earlier running LGUP. Uppercut.exe requires LGUP 1.14 (not 1.11) installed on the computer.



uppercut LGUP

3. Now, seat your LG G6 Smartphone into download mode, you lot tin manually create it past times ;
https://goo.gl/Y5SGeF
• Turn Off your LG G6 Smartphone device.
• Then press in addition to concord Volume UP push land connecting your LG G6 Smartphone to the estimator using the USB cable.
4. Then run LGUP tool.
5. Wait a 2nd until LGUP unwrap in addition to recognize your LG smartphone. This volition install a necessary USB Drivers for your device.
6. Now, your LGUP should demo upwards on your estimator screen.



Flash LG G6 H870 using LGUP

7. From LG UP hide above, instruct to process tab in addition to choose Upgrade.
8. Then click on BIN file nether file type.



Flash LG G6 H870 using LGUP

9. Then click the push on the correct side of bin file shown inwards the film below.



Flash LG G6 H870 using LGUP

10. This activity volition browse your kdz/tot file you lot exactly download.
11. Once your kdz/tot file already inwards the LGUP software, at nowadays click Start.



Flash LG G6 H870 using LGUP

12. Now, LGUP volition commencement flashing process, this is indicated on the progress bar.



Flash LG G6 H870 using LGUP

13. Just expect until the pace on progress bar shows 100% complete. Once it completed LG G6 volition automatically reboot
14. Now, you lot tin unplug your LG G6 device from the computer.