How To Flash Firmware On Bricked Motorola Moto E (1St Gen-2014) Amongst Rsd Low-Cal Tool.

How to Flash Firmware on Bricked Motorola Moto E (1st gen-2014) With RSD Lite Tool.

Flash Motorola Moto E (1st gen 2014). Once your Moto E (1st gen 2014) bricked it volition no longer operate unremarkably together with instruct useless. And you lot tin restore it to the normal telephone except you lot practise sum Android backup or called Nandroid alongside custom recovery. But, don't worry close it. You tin however salve your Motorola Moto E (1st gen-2014) alongside this next method. This method below volition demo you lot how to install or flash a novel firmware on Motorola Moto E (1st gen-2014) using RSD Lite tool. Simply simply download the appropriate firmware for your device together with RSD visible lamp tool from the official website. Why nosotros purpose RSD Lite? because this software is peculiarly designed to attention the user flash firmware into Motorola smartphone.

This is Motorola Moto E (1st gen-2014) specs. This device Also known equally Motorola Moto E XT1021, released inward 2014, May. Comes alongside 4.3 Inches Capacitive touchscreen, 16M colors display. Powered by Dual-core 1.2 GHz Cortex-A7 CPU, Qualcomm Snapdragon 200 chipset, Adreno 302 GPU. Supported yesteryear 1 GB of RAM, together with featured alongside five MP of master copy camera, but this device comes alongside no secondary camera. Motorola Moto E (1st gen-2014) run on Android OS, v4.4.2 (KitKat), upgradable to v4.4.4 (KitKat), planned upgrade to v5.1 (Lollipop).

The next remove below volition attention you lot pace yesteryear pace flashing Motorola Moto E (1st gen-2014).

Preparations - First Step.

1. Backup all user data, files, together with the app installed on telephone internal memory. It volition endure deleted during flashing process.
2. Your Motorola Moto E (1st gen-2014) battery should fully accuse or at to the lowest degree has 75 % of battery capacity.
3. Always purpose an original USB cable to connect the Motorola Moto E (1st gen-2014) to the computer.
4. Make certain USB driver for Motorola Moto E (1st gen-2014) is installed on the computer, If you lot don't convey this driver, here you tin instruct it.
5. RSD visible lamp flash tool is needed to attention flash firmware into Motorola Moto E (1st gen-2014). Here 
6. Motorola Moto E (1st gen-2014) firmware is here.

Flashing Motorola Moto E (1st gen-2014) - 2nd Step

1. Turn off  Motorola Moto E (1st gen-2014) smartphone.
2. Once it completely Turns ff, straightaway kick your Motorola Moto E (1st gen-2014) into fastboot mode. 
• Press together with hold Power button + Volume Up button at the same time.

  

  Enter fastboot fashion - Motorola moto E 2014

3. Then connect Motorola Moto E (1st gen-2014) to the figurer using the USB cable.
4. Make certain your Motorola Moto E (1st gen-2014) is successfully detected on the computer, if neglect you lot tin essay this.
• Check your USB cable
• Change figurer ports
• Check your USB driver.
5. Install RSD Lite on the computer, together with hence run this software from desktop or origin menu.
6. Once RSD Lite window runs on the computer, Click the push clit marked alongside the arrow together with reddish circle shown inward the pic below to load Motorola Moto E (1st gen-2014) firmware.



RSD visible lamp tool - charge firmware

7. Now, navigate to the firmware folder place you lot convey downloaded before.
8. The firmware should convey this extension. 
• *.shx, 
• *.hs, 
• *.XML, 
• *.sbf,
9. Once your Motorola Moto E (1st gen-2014) firmware successfully loaded, you lot tin run into at the file properties window.

   

   rsd file properties

10. To origin flashing Motorola Moto E (1st gen-2014), simply click Start button.
11. You tin run into the flashing progress at the condition window. 
12. Once finished Motorola Moto E (1st gen-2014) volition reboot automatically. you lot tin safely disconnect Motorola Moto E (1st gen-2014) from the computer.
13. Finish.