Guide | How To Flash Firmware On Motorola Xoom Ii Media Edition 3G Mz608.

Guide | How to Flash Firmware on Motorola XOOM two Media Edition 3G MZ608.

Flash Motorola XOOM two MZ608. Flashing procedure is also known every bit installing a novel firmware into the device. Firmware is a software used for monitoring, controlling in addition to manipulating a device to run well. So, if your device has whatsoever mistake or wearisome response, y'all tin flaming endeavour to flash amongst the latest firmware for your device. And forthwith on this guide, nosotros volition demonstrate y'all how to flash Firmware on Motorola XOOM two Media Edition 3G MZ608. It's a uncomplicated conduct y'all tin flaming follow amongst a small-scale risk. But, y'all must ever live on careful to create it on your Motorola XOOM two  MZ608 device to avoid harm or totally dead.

Here is your Motorola XOOM two Media Edition 3G MZ608 specifications. This device released inwards 2011, December. With 8,2 inches TFT capacitive touchscreen, 16M colors, powered past times Dual-core 1.2 GHz Cortex-A9 CPU, TI OMAP 4430 Chipset, in addition to PowerVR SGX540 GPU. Supported past times 1 GB internal memory, five MP principal camera, 1,3 MP secondary camera. And run on Android OS, v3.2 (Honeycomb), planned upgrade to v4.0.4 (Ice Cream Sandwich).

Flashing Motorola XOOM two Media Edition 3G MZ608 foremost here.

#1 Step.

1. All information in addition to file stored on Motorola XOOM two Media Edition 3G MZ608 must live on moved to the salvage storage.
2. Make certain battery isn't empty or minimum has 75% of battery capacity.
3. Don't role an unoriginal USB cable to connect betwixt your Motorola XOOM two Media Edition 3G MZ608 to the PC or laptop.
4. Motorola XOOM two Media Edition 3G MZ608 driver should installed correctly on your estimator or laptop. You tin flaming download this driver via this link below.
5. Now y'all must download in addition to install RSD low-cal Multi Flash tool from here.
6. Now, d0wnload Motorola XOOM two MZ615 firmware file.
• 1.6.0M-272.10_MZ608_p2HW_BlurRegion02_CFC1FF_fastboot_signed_latam.xml.zip Here 
• 1.6.0M-272.12_MZ608_p2HW_BlurRegion02_CFC1FF_fastboot_signed_latam.xml.zip Here 
• 1.6.0M-272.18_MZ608_p2HW_BlurRegion01_CFC1FF_fastboot_signed_latam.xml.zip Here 
• 1.6.0M-272.18_MZ608_p2HW_BlurRegion03_CFC1FF_fastboot_signed_latam.xml.zip Here 
• 1.6.0M-272.19_MZ608_p2HW_BlurRegion02_CFC1FF_fastboot_signed_latam.xml.zip Here 
• 1.6.0M-272.20_MZ608_p2HW_BlurRegion04_CFC1FF_fastboot_signed_latam.xml.zip Here 
• 7.7.1-141-7-FLEM-UMTS-LA_MZ608_p2HW_BlurRegion06_CFC1FF_fastboot_signed_latam.xml.zip Here 

#2 Step. Flashing Motorola XOOM two Media Edition 3G MZ608.

1. Now, kicking Motorola XOOM two Media Edition 3G MZ608 device to bootloader mode. How to create it?
• Power off the Motorola XOOM two MZ615, past times press in addition to concur ability push clit for a second, it volition completely plow off the device.
• Now, press in addition to concur both volume downward + book up button.
2. Now, connect your Motorola XOOM two Media Edition 3G MZ608 to the estimator via USB cable.
3. Make certain your Motorola XOOM two Media Edition 3G MZ608 successfully detected on your estimator via bootloader mode.
4. If failed, endeavour to role master copy USB cable or modify your estimator port.
5. Then, Open RSD Lite from the foremost menu.

   

   rsd low-cal flash tool

6. Click the push clit assigned amongst cherry-red circle demonstrate at the flick higher upward to charge Motorola XOOM two Media Edition 3G MZ608 firmware.
7. Firmware file should accept this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
8. Once your firmware successfully loads, RSD low-cal should await similar the flick shown below.

   

   rsd lite

9. Now click start button.
10. Flashing procedure volition foremost automatically without your interference.
11. Wait a piece until flashing your Motorola XOOM two Media Edition 3G MZ608 finish.