Guide How To Flash Firmware On Motorola Razr D1 Amongst Rsd Lite.

Guide How to Flash Firmware on Motorola RAZR D1 With RSD Lite.

Flash Firmware on Motorola RAZR D1. Right hither nosotros would explicate to you lot how to flash or install a novel firmware onto Motorola RAZR D1 using RSD Lite flash tool. RSD or Remote Software Download is a Motorola tool that helps us to flash a firmware. Use this involve to educate a bricked or bootloop Motorola RAZR D1 device. Or you lot tin purpose this involve to update Motorola RAZR D1 device that is no longer getting Operating System updates straight (Over the Air) from the telephone manufacturer. Simply only download a firmware together with the others tool from the available link below. Then salvage it on your local reckoner or laptop.

To give-up the ghost along alongside this involve you lot must know well-nigh this Motorola RAZR D1 versions ;

• Motorola RAZR D1 XT914 (LATAM), 
• Motorola RAZR D1 XT915 (Single SIM), 
• Motorola RAZR D1 XT916 (Dual SIM), 
• Motorola RAZR D1 XT918 (Dual SIM, TV)

This device is released inwards 2013, March. With 3.5 inches TFT touchscreen. powered past times 1.0 GHz Cortex-A9 CPU, Mediatek MT6575M chipset, PowerVR SGX531 GPU, Supported past times 1 GB internal memory, five MP main camera, no secondary camera. And run on Android OS, v4.1 (Jelly Bean), upgradable to v4.4.2 (KitKat).

Let's nosotros start our involve below

#1 Step.

1. To avoid your information together with file saved on  Motorola RAZR D1 lose during the flashing process, essay to dorsum upwards it first 
2. Try to maintain your battery ability at 80% of fully charged.
3. For best suggestions, nosotros recommend using an master USB cable to connect your Motorola RAZR D1 to the computer.
4. Make certain driver for Motorola RAZR D1 installed correctly if you lot don't bring the driver all the same delight download via this link below.
5. Download together with install RSD Lite Multi flash to the reckoner or laptop. Here
6. Here you lot tin download Motorola RAZR D1 firmware file. (choose appropriate file according to your telephone versions)
• Motorola RAZR D1 XT914 (LATAM) Here 
• Motorola RAZR D1 XT915 (Single SIM) Here 
• Motorola RAZR D1 XT916 (Dual SIM) Here 
• Motorola RAZR D1 XT918 (Dual SIM, TV) Here 

#2. Flashing Motorola RAZR D1.

1. Now, kicking Motorola RAZR D1 device to bootloader mode. How to produce it?
• Power off the Motorola RAZR D1, past times press together with concur ability push for a seconds, it volition completely plough off the device.
• Now, press together with concur both volume downwards + book up button.
2. Now, connect your Motorola RAZR D1 to the reckoner via USB cable.
3. Make certain your Motorola RAZR D1 successfully detected on your reckoner via bootloader mode.
4. If failed, essay to purpose master USB cable or modify your reckoner port.
5. Then, Open your RSD Lite software on your reckoner from start menu.

   

   rsd calorie-free flash tool

6. Click the push assigned alongside cherry circle present at the motion-picture present higher upwards to charge Motorola RAZR D1 firmware.
7. Firmware file should bring this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
8. Once your Motorola RAZR D1 firmware successfully loads, RSD calorie-free flash tool should expect similar the motion-picture present shown below.

   

   rsd lite

9. Now click the start button. to start the flashing process.
10. Flashing procedure volition start automatically without your interference.
11. Just hold off a piece until flashing your Motorola RAZR D1 done.