How To Flash Novel Firmware Samsung Galaxy Xcover Three Amongst Odin V3.11.1

How to Flash New Firmware Samsung GALAXY XCOVER three With ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY XCOVER 3. This Guide volition exhibit you lot how to Flash / Install Firmware Samsung GALAXY XCOVER 3 Using ODIN v3.11.1. If you lot desire to upgrade your Samsung GALAXY XCOVER 3 firmware, nosotros recommend using Samsung’s ain utilities OTA (Over-the-air) or Samsung Kies. Use this guide exclusively if you lot empathize or certain 97% close risks involved inwards flashing your Samsung GALAXY XCOVER three device.

This device is released on 2015, March. Samsung GALAXY XCOVER 3 is the smartphone with 4,5 Inchi PLS TFT capacitive touchscreen, 16M colors, operate on Android OS, v4.4.4 (KitKat), planned upgrade to v5.0 (Lollipop), Powered past times  Quad-core 1.2 GHz Cortex-A53 CPU, Marvell Armada PXA1908, Vivante GC7000 GPU, combined amongst 1.5 GB of RAM together with five MP of  Main photographic goggle box camera together with ii MP on secondary camera. 

Pre Requisite.

Below is the next things you lot must produce earlier flashing your Android Samsung Smartphone device.

1. Make certain your Samsung GALAXY XCOVER 3 is fully charged. or minimum has 90% of battery capacity. It volition avoid the flashing process failure.
2. Flashing process will delete or wipe all information stored inwards internal memory. So, don't forget to backup all information earlier flashing device.
3. Make certain you lot direct maintain installed a latest of the Samsung driver, that back upwardly amongst your device If you lot don't have, you lot tin john download here 
4. Original USB cable driver for your Samsung GALAXY XCOVER 3.
5. Download Odin V3.11.1, Here.
6. Firmware Download. (use 1 of the three methods below to download Samsung Firmware)
• One. Download Official firmware file for the model release of your device, download it from - SamMobile, or you lot tin john visit samsung-updates.com/
• Two. Guide How to Download Official Samsung Firmware From SamMobile. Here 
• Three. Firmware Samsung GALAXY XCOVER 3, you must Log In to download firmware via this link.
• SM-G388F - France, Open Austria, South Africa, Poland, Nordic Countries, United Kingdom, Cyprus, Slovenia, Belgium, Italy, Hungary, Portugal, Romania, Norway, Greece, Slovakia, Baltic, Netherlands, Germany, Bulgaria,  - Here 

Guide To Flash Samsung GALAXY XCOVER 3 

1. You must download all necessary file. (Samsung USB driver together with Odin)
2. Then, install all driver to your figurer or PC.
3. Extract Odin V3.11.1. file inwards the finish folder.
4. Switch Off your Samsung GALAXY XCOVER three to foremost flashing process.
5. Then, run Odin3 v3.11.1 by correct click on Odin.exe together with direct Run equally Administrator.

   

   Flash Stock Firmware On Samsung GALAXY XCOVER 3

6. When the computer program is running, forthwith you lot tin john click AP, and navigate to the *.tar or *.tar.md5 firmware file. 

   

   Flash Stock Firmware On Samsung GALAXY XCOVER 3

7. Now your firmware file has been inserted inwards Odin3 

   

   Flash Stock Firmware On Samsung GALAXY XCOVER 3

8. Then, Enter download vogue your Samsung GALAXY XCOVER 3. See this guide how to produce it. 
9. On this mode, forthwith connect your Samsung GALAXY XCOVER 3 to your PC / laptop using a USB cable. 
10. After your telephone connected, you lot volition encounter a message look that exhibit your device added together with at that topographic point is information on the ID: COM at survive past times left corner. Keep inwards heed for this COM vary depending on the PC / Laptop. Just Ignore all, inwards this motion-picture exhibit you lot volition encounter that your device is detected on (COM 5)

    

    Port Com Samsung GALAXY XCOVER 3

11. Make certain re-partition is NOT ticked
12. When everything already you lot tin john click Start Button. at the bottom left corner
13. Just await for the procedure to run close 2-5 minutes, together with brand certain at that topographic point is no interference inwards this process. 
14. When consummate it volition display a notification PASS together with your smartphone Samsung GALAXY XCOVER 3 will automatically restart.
15. Wait your device to kick up, it volition direct maintain a while.
16. When your Samsung GALAXY XCOVER three is create to use, forthwith cheque your firmware version. See this guide how to cheque it. 
17. Finish.