Guide to Flash / Install Firmware Samsung GALAXY S7 Using ODIN v3.11.1.

Flash Stock Firmware Samsung Milky Way S7. If you lot desire to upgrade your Samsung Milky Way S7 firmware, nosotros recommend using Samsung’s ain utilities OTA (Over-the-air) or Samsung Kies. follow this guide exclusively if you lot empathize virtually risks involved inwards flashing your Samsung Milky Way S7 device. On this guide, nosotros flash Samsung device using ODIN v3.11.1.


This device is released on 2016, March. Samsung Milky Way S7 is the smartphone with 5,1 Inch Super AMOLED capacitive touchscreen, 16M colors, operate on Android OS, v6.0 (Marshmallow), Supported alongside Quad-core (2x2.15 GHz Kryo & 2x1.6 GHz Kryo) CPU, Qualcomm MSM8996 Snapdragon 820 chipset, Adreno 530 GPU, combined alongside 4000 MB of RAM as well as 12 MP of  Main photographic goggle box camera as well as five MP on secondary camera. 

Preparation.

Below are the next things you lot must produce earlier flashing your Android Samsung Smartphone device.

1. Make certain your Samsung Milky Way S7 is fully charged. or minimum has 88 % of battery capacity. It volition avoid the flashing process failure.
2. Flashing process will delete or wipe all information stored inwards internal memory. So, don't forget to backup all information earlier flashing device.
3. Make certain you lot cause got installed a latest of the Samsung driver, that back upwards alongside your device If you lot don't have, you lot tin john download here 
4. Original USB cable driver for your Samsung Milky Way S7.
5. Download Odin V3.11.1, Here 
6. Download Official firmware file for the model release of your device, download it from - SamMobile, or you lot tin john visit samsung-updates.com/
7. Or you lot tin john read Guide How to Download Official Samsung Firmware From SamMobile. Here 
8. Firmware Samsung Milky Way S7, you must Log In to download firmware via this link.
• SM-G930F (GALAXY S7) - Global. Here 
• SM-G930FD - Southeast Asia Here 
• SM-G930T - T-Mobile. Here. 

Guide To Flash Samsung GALAXY S7 

1. You must download all necessary file. (Samsung USB driver as well as Odin)
2. Then, install all driver to your figurer or PC.
3. Extract Odin V3.11.1. file inwards the goal folder.
4. Switch Off your Samsung Milky Way S7 to offset flashing process.
5. Then, run Odin3 v3.11.1 by correct click on Odin.exe as well as conduct Run every bit Administrator.

   

   Flash Stock Firmware On Samsung GALAXY S7

6. When the plan is running, at 1 time you lot tin john click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
7. Now your firmware file has been inserted inwards Odin3  
8. Then, Enter download agency your Samsung Milky Way S7. See this guide how to produce it.
9. On this mode, at 1 time connect your Samsung Milky Way S7 to your PC / laptop using a USB cable. 
10. After your telephone connected, you lot volition meet a message look that exhibit your device added as well as in that place is information on the ID: COM at come about left corner. Keep inwards hear for this COM vary depending on the PC / Laptop. Just Ignore all, inwards this flick you lot volition meet that your device is detected on (COM 5)

    

    Port Com Samsung GALAXY S7

11. Make certain re-partition is NOT ticked
12. When everything already you lot tin john click Start Button. at the bottom left corner
13. Just human face for the procedure to run virtually 2-5 minutes, as well as brand certain in that place is no interference inwards this process. 
14. When consummate it volition display a notification PASS as well as your smartphone Samsung Milky Way S7 will automatically restart.
15. Wait for your device to kicking up, it volition cause got a while.
16. When your Samsung Milky Way S7 is cook to use, at 1 time banking company gibe your firmware version. See this guide how to banking company gibe it. 
17. Finish.