Guide To Flash Lenovo Vibe K5 Addition Dorsum To Stock (Fastboot | Twrp Method)

Guide to Flash Lenovo Vibe K5 Plus Back to Stock (Fastboot | TWRP Method).

Flash Lenovo Vibe K5 Plus (TWRP). Use this method to flash Lenovo Vibe K5 dorsum to stock if you lot tin non kicking into download mode, but inward this case, you lot convey a custom recovery or you lot tin solely travel into fastboot agency on your device. This conduct is a continuation of How to Flash Lenovo Vibe K5 Plus Back to Stock Using QFIL,
which this conduct nosotros bespeak QFIL software to tending flashing device. 

Thanks for Hnk1
@xda forum for this guide. Now, permit nosotros showtime this guide.

Pre Requisites.

1. Driver Lenovo Vibe K5 Plus. Here  
2. ADB or SDK must survive installed correctly on your computer, run into this guide. 
• If this doesn't come about your computer, Just download the platform.zip as well as extract it to C:\platform-tools.
• Then, Rename the platform-tools folder to adb
• Now, opened upwards cmd from the showtime bill of fare (press Windows + R) thus type cmd
• Once ascendance prompt window open, type C:\>
• Type it twice or more, until you lot see C:\> in ascendance prompt
• Now, type cd adb
• It's fourth dimension to come about adb.
3. Download Stock Recovery for Lenovo Vibe K5 Plus Here.   copy it to the folder where adb is installed on your computer.

Enable USB Debugging.

1. Activate the Developer options on your Lenovo Vibe K5 Plus device.
• Go to Settings
• About phone
• Device Information
• Then tap vii times on Build number.
2. Enable USB debugging 
• Go to Settings - Developer Option - USB Debugging
3. Then, Enable OEM to unlock Settings - Developer - Unlock OEM
4. Finish.

Flash Lenovo Vibe K5 Plus (TWRP Method)

Once your Prerequisites already download as well as install on your computer, straight off showtime this conduct below.

1. Open the folder where your TWRP Recovery.img file is saved.
2. Then, opened upwards ascendance prompt within the TWRP Recovery.img folder. How to produce it?
• Hold shift on keyboard + Right click on whatever empty white infinite within the folder.
• Then select Open ascendance window here from the context menu.



Run ADB on computer

3. Now, connect your Lenovo Vibe K5 Plus device to the reckoner via USB cable.
4. Now type the ascendance below,

• adb devices

5. This ascendance used to confirm the connection between Lenovo Vibe K5 Plus and the computer.
6. Once the connection confirmed. Now type.

• adb reboot bootloader

7. If you lot desire to temporarily kicking this recovery type,

• fastboot kicking TWRP-k5-3.0.2-r1_shreps.img

8. If you lot desire to permanently flash it, type ;

• fastboot flash recovery TWRP-k5-3.0.2-r1_shreps.img

9. Once TWRP is successfully flashed on your device, straight off type the next ascendance to reboot your device.

• fastboot reboot

10. Finish.