How to Flash / Install Firmware Samsung GALAXY J3 PRO (2016) Using ODIN v3.11.1 | Guide.

Flash Stock Firmware Samsung GALAXY J3 PRO (2016). Use this method solely if y'all understand what are the risks posed flashing your device. And this lead using flash tool for Samsung called ODIN. If y'all solely desire to upgrade your Samsung GALAXY J3 PRO (2016), nosotros recommend using Samsung’s ain utilities OTA (Over-the-air) or Samsung Kies. follow this lead solely if y'all sympathise almost risks involved inwards flashing your Samsung GALAXY J3 PRO (2016) device.

This device is released on 2016, June. Samsung GALAXY J3 PRO (2016) is the smartphone with 5,2 Inch Super AMOLED capacitive touchscreen, 16M colors, operate on Android OS, v6.0.1 (Marshmallow), Supported alongside Octa-core (4x1.5 GHz Cortex-A53 & 4x1.2 GHz Cortex-A53) CPU, Qualcomm MSM8952 Snapdragon 617 chipset, Adreno 405 GPU, combined alongside 4000 MB of RAM together with sixteen MP of  Main photographic tv set camera together with 8 MP on secondary camera. 

Preparation.

Below is the next things y'all must produce earlier flashing your Android Samsung Smartphone device.

1. Make certain your Samsung GALAXY J3 PRO (2016) is fully charged. or minimum has 88 % of battery capacity. It volition avoid the flashing process failure.
2. Flashing process will delete or wipe all information stored inwards internal memory. So, don't forget to backup all information earlier flashing device.
3. Make certain y'all get got installed a latest of the Samsung driver, that back upwards alongside your device If y'all don't have, y'all tin lavatory download here 
4. Original USB cable driver for your Samsung GALAXY J3 PRO (2016).
5. Download Odin V3.11.1, Here 
6. Download Official firmware file for the model release of your device, download it from - SamMobile, or y'all tin lavatory visit samsung-updates.com/
7. Or y'all tin lavatory read Guide How to Download Official Samsung Firmware From SamMobile. Here 
8. Firmware Samsung GALAXY J3 PRO (2016), you must Log In to download firmware via this link.
• SM-J320R4 - USA. Direct Link. 

Guide To Flash Samsung GALAXY J3 PRO (2016) 

1. You must download all necessary file. (Samsung USB driver together with Odin)
2. Then, install all driver to your estimator or PC.
3. Extract Odin V3.11.1. file inwards the finish folder.
4. Switch Off your Samsung GALAXY J3 PRO (2016) to firstly flashing process.
5. Then, run Odin3 v3.11.1 by correct click on Odin.exe together with choose Run every bit Administrator.

   

   Flash Stock Firmware On Samsung GALAXY J3 PRO (2016)

6. When the plan is running, straight off y'all tin lavatory click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
7. Now your firmware file has been inserted inwards Odin3 
8. Then, Enter download fashion your Samsung GALAXY J3 PRO (2016). See this guide how to produce it. 
9. On this mode, straight off connect your Samsung GALAXY J3 PRO (2016) to your PC / laptop using a USB cable. 
10. After your telephone connected, y'all volition run across a message seem that present your device added together with at that spot is information on the ID: COM at hold upwards yesteryear left corner. Keep inwards hear for this COM vary depending on the PC / Laptop. Just Ignore all, inwards this moving-picture present y'all volition run across that your device is detected on (COM 5)

    

    Port Com Samsung GALAXY J3 PRO (2016)

11. Make certain re-partition is NOT ticked
12. When everything already y'all tin lavatory click Start Button. at the bottom left corner
13. Just await for the procedure to run almost 2-5 minutes, together with brand certain at that spot is no interference inwards this process. 
14. When consummate it volition display a notification PASS together with your smartphone Samsung GALAXY J3 PRO (2016) will automatically restart.
15. Wait for your device to kicking up, it volition get got a while.
16. When your Samsung GALAXY J3 PRO (2016) is create to use, straight off cheque your firmware version. See this guide how to cheque it. 
17. Finish.