How To Flash / Install Firmware Samsung Galaxy S7 Border Using Odin V3.11.1 | Guide.

How to Flash / Install Firmware Samsung GALAXY S7 EDGE Using ODIN v3.11.1 | Guide.

Flash Stock Firmware Samsung GALAXY S7 EDGE. This device is known as Samsung Milky Way S7 edge Duos amongst dual-SIM bill of fare slots. The versions of this device are; G935F (Global); G935FD (Southeast Asia), G935 (USA). And similar a shot nosotros volition exhibit you lot how to flash or install a novel firmware on this device. If you lot desire to upgrade your Samsung GALAXY S7 EDGE firmware, nosotros recommend using Samsung’s ain utilities OTA (Over-the-air) or Samsung Kies. follow this guide exclusively if you lot empathize close risks involved inward flashing your Samsung GALAXY S7 EDGE device. On this guide, nosotros flash Samsung device using ODIN v3.11.1.

This device is released on 2016, March. Samsung GALAXY S7 EDGE is the smartphone with 5,5 Inchi Super AMOLED capacitive touchscreen, 16M colors, live on Android OS, v6.0 (Marshmallow), Supported amongst QQuad-core (2x2.15 GHz Kryo & 2x1.6 GHz Kryo) CPU, Qualcomm MSM8996 Snapdragon 820 chipset, Adreno 530 GPU, combined amongst 4000 MB of RAM too 12 MP of  Main photographic idiot box camera too five MP on secondary camera. 

Preparation.

Below is the next things you lot must produce earlier flashing your Android Samsung Smartphone device.

1. Make certain your Samsung GALAXY S7 EDGE is fully charged. or minimum has 88 % of battery capacity. It volition avoid the flashing process failure.
2. Flashing process will delete or wipe all information stored inward internal memory. So, don't forget to backup all information earlier flashing device.
3. Make certain you lot get got installed a latest of the Samsung driver, that back upwards amongst your device, If you lot don't have, you lot tin download here 
4. Original USB cable driver for your Samsung GALAXY S7 EDGE.
5. Download Odin V3.11.1, Here 
6. Download Official firmware file for the model publish of your device, download it from - SamMobile, or you lot tin visit samsung-updates.com/
7. Or you lot tin read Guide How to Download Official Samsung Firmware From SamMobile. Here 
8. Firmware Samsung GALAXY S7 EDGE, you must Log In to download firmware via this link.
• SM-G935F - Global. Here 
• SM-G935FD - India, Sri Lanka, Nepal, Bangladesh, Singapore, Malaysia, Thailand - Here. 

Guide To Flash Samsung GALAXY S7 EDGE 

1. You must download all necessary file. (Samsung USB driver too Odin)
2. Then, install all driver to your estimator or PC.
3. Extract Odin V3.11.1. file on the goal folder.
4. Switch Off your Samsung GALAXY S7 EDGE to outset flashing process.
5. Then, run Odin3 v3.11.1 by correct click on Odin.exe too conduct Run every bit Administrator.

   

   Flash Stock Firmware On Samsung GALAXY S7 EDGE

6. When the programme is running, similar a shot you lot tin click AP, and navigate to the *.tar or *.tar.md5 firmware file. 

   

   Flash Stock Firmware On Samsung GALAXY S7 EDGE

7. Now your firmware file has been inserted inward Odin3 
8. Then, Enter download trend your Samsung GALAXY S7 EDGE. See this guide how to produce it. 
9. On this mode, similar a shot connect your Samsung GALAXY S7 EDGE to your PC / laptop using a USB cable. 
10. After your telephone connected, you lot volition run into a message look that exhibit your device added too at that topographic point is information on the ID: COM at exceed left corner. Keep inward heed for this COM vary depending on the PC / Laptop. Just Ignore all, inward this painting exhibit you lot volition run into that your device is detected on (COM 5)

    

    Port Com Samsung GALAXY S7 EDGE

11. Make certain re-partition is NOT ticked
12. When everything already you lot tin click Start Button. at the bottom left corner
13. Just await for the procedure to run close 2-5 minutes, too brand certain at that topographic point is no interference inward this process. 
14. When consummate it volition display a notification PASS too your smartphone Samsung GALAXY S7 EDGE will automatically restart.
15. Wait for your device to kick up, it volition accept a while.
16. When your Samsung GALAXY S7 EDGE is create to use, similar a shot banking concern stand upwards for your firmware version. See this guide how to banking concern stand upwards for it. 
17. Finish.