Guide - How to Flash Stock Firmware on Android Lenovo Vibe P1m.

Flash Stock Firmware Lenovo Vibe P1m. guidebelajar on this take volition demo yous how to flash stock Firmware on Lenovo Vibe P1m, You tin follow this take if yous stimulate got downloaded in addition to installed whatsoever custom ROM on your Lenovo Vibe P1m, And yous desire to revert dorsum to the master copy version Android operating arrangement which came out of the box. On this take required your Lenovo Vibe P1m has root access. So, before yous give-up the ghost on flash on this Android device yous must root it first. Please beware, that rooting in addition to flashing custom ROMs results breaking the warranty of Lenovo Vibe P1m device. guidebelajar is non responsible for whatsoever squall upwardly harm which is incurred during Custom ROMs flashing process.

Lenovo Vibe P1m is device released inwards 2015, September. comes with Android OS, v5.1 (Lollipop) in addition to supported with Mediatek MT6735P, Quad-core 1.0 GHz Cortex-A53 CPU, GPU  Mali-T720MP2, combined amongst ii GB of RAM in addition to 8 MP of Main photographic television camera in addition to v MP on secondary camera.

Prepare this before flash Lenovo Vibe P1m.

1. Make certain yous stimulate got backup all information in addition to file stored on Internal retentiveness Lenovo Vibe P1m
2. Make certain yous stimulate got at to the lowest degree 80% of battery capacity
3. Root your Lenovo Vibe P1m devices, see this take to root it.  Here
4. Download SP Flash Tool 5.1532. Here 
5. Download Lenovo Vibe P1m Stock Firmware. Here  
6. Make certain yous stimulate got enabled USB Debugging on your Android Lenovo Vibe P1m device.
• Go to Settings ->Developer Options -> USB Debugging.
• If Developer Options does non seem nether the settings menu. You tin enable it past times going to :
• Settings > About Phone > Device Info in addition to tap on Build Number for well-nigh 7-8 times. And thence become dorsum in addition to follow the previous step.

ROM Description.

1. ROM Version : S025_150924
2. Android Version: 5.1
3. ROM Type: VIBE UI
4. ROM Author/ credits: Lenovo Forums
5. Feature: All Stock Features
6. ROM Bit: 64

Guide to Install Stock ROM on Lenovo Vibe P1m.

1. You must download SP Flash Tools in addition to the custom ROM from the download link above.
2. Then, extract SP Flash tool and TWRP recovery on the specific folder on your computer, nosotros recommended yous extract it on the desktop.
3. Then take your Sim card in addition to SD Card if installed.
4. Next, Connect your Lenovo Vibe P1m to Computer, spell belongings the power push in addition to book up. The PC will detect the new hardware, only ignore it. 
5. Open SP flash tool software and click scatter load. find Lenovo Vibe P1m scatter storage place earlier. (on the desktop).

   

   MT6752 scatter

6. In the Scatter-Loading field become to the folder where yous extracted the Flash Tool in addition to select target_bin

   

   Flash / Install Firmware Lenovo VIBE S1.

7. Then yous click options ->Download -> then check DA DL all amongst a checksum.

   

   Flash / Install Firmware Lenovo VIBE S1.

8. On download tab, ensure yous stimulate got selected download only option from drop-down menu, run into below picture.

   

   Flash / Install Firmware Lenovo VIBE S1.

9. Then, click the download button on transcend correct in addition to connect your Lenovo Vibe P1m with the USB cable inwards squall upwardly switch off position.



Flash / Install Firmware Lenovo VIBE S1.

10. The procedure volition run automatic, in addition to yous tin see the cherry stripe showing download per centum at bellow
11. When your procedure complete, yous tin run into a light-green circle amongst a tick mark. 

    

    Flash / Install Firmware Lenovo VIBE S1.

12. Now disconnect your Lenovo Vibe P1m
13. Then, start your Lenovo Vibe P1m. (remember, on the offset booting it volition stimulate got a long fourth dimension to start)
14. Success. enjoy.