Guide To Configuring Dynamic Hp Smart Array B120i Raid Back Upward On Hp Proliant Ml10 V2 Server

Guide to configuring Dynamic HP Smart Array B120i RAID back upwardly On HP Proliant ML10 V2 server.

Configuring Dynamic HP Smart Array B120i RAID support. On this guide, nosotros volition present to you lot how to enable Dynamic HP Smart Array B120i RAID support on Proliant ML10 V2 server. This is a real unproblematic chore you lot tin create to gear upwardly this server. You tin enable it yesteryear entering the BIOS organisation on this server. for some HP ProLiant you lot tin purpose the F9 fundamental on the keyboard to larn into Bios system. Now follow this guide carefully.

Read this : How to  to install Windows Server 2012 R2 operating organisation on HP Proliant ML10 V2 server.

Enabling Dynamic HP Smart Array B120i RAID.

1. Start your Proliant ML10 V2 server yesteryear pressing Power push located inwards forepart of server trunk casing
2. Now, expect for the initializing process, it takes 2-3 minute.

   

   initializing procedure - ProLiant ml10 v2

3. When you lot run across F9 on your screen, hitting this push on your keyboard to larn into Setup. F9 located on the left bottom of your screen.

   

   enter bios - ProLiant ml10 v2

4. Once you lot entering Setup on Proliant ML10 V2, straightaway highlight System Options. (navigate using upwardly together with downward arrow keyboard button, together with larn into to confirm your selection).



System options  - Proliant ML10 V2

5. Then you lot volition run across side yesteryear side options, straightaway highlight SATA Controller options together with hitting enter.

   

   SATA Controller options - ProLiant ml10 v2

6. Now, hitting larn into to Enable Dynamic HP Smart Array B120i RAID Support.

   

   Enable Dynamic HP Smart Array B120i RAID Support.

7. Then you lot volition run across a alarm on your covert amongst reddish background together with xanthous text. Enabling RAID volition lawsuit inwards information loss or information corruption on existing SATA drives. Please backup all drives earlier enabling this feature.



Enabling RAID volition lawsuit inwards information loss or information corruption on existing SATA drives. Please backup all drives earlier enabling this feature.

8. On the side yesteryear side screen, you lot volition run across 3 options, 
9. Enable SATA legacy Support
10. Enable SATA AHCI Support
11. just select: Enable Dynamic HP Smart Array B120i RAID support yesteryear pressing enter

12. 

    Enable Dynamic HP Smart Array B120i RAID support

13. Now dorsum to habitation screen, together with therefore relieve together with leave of absence from HP Proliant ML10 V2 setup utility yesteryear pressing F10 push on your keyboard.

    

    F10 relieve together with leave of absence from Proliant ML10 V2 setup

14. Finish, straightaway you lot stimulate got successfully configuring Dynamic HP Smart Array B120i RAID back upwardly On HP Proliant ML10 V2 server.